新闻动态
综合新闻
科研动态
学术活动
媒体聚焦
通知公告
您现在的位置:首页 > 新闻动态 > 学术活动
10.15】李薰讲座系列
Prof.Dr.-Ing. Gerhard Hirt
 
2014-10-09 | 文章来源:李薰奖办公室        【 】【打印】【关闭

Lee Hsun Lecture Series

Topic: Process and Materials Modelling in Incremental Forging and Ring Rolling

Speaker: Prof. Dr.-Ing. Gerhard Hirt

          Institute of Metal Forming (IBF), RWTH Aachen University, Germany

Time: 10:00-12:00, 14:00-15:30,  (Wed.) Oct. 15, 2014

Venue: Room 403, Shi Changxu Building, IMR CAS

Welcome to attend!

The lecture presents two selected topics in the field of modelling of incremental forming processes:

(1) For open die forging a simplified online model is presented to assist the press operator by displaying the current distributions of strain, temperature and grain size along the centerline of the workpiece.

(2) For FEM simulation of ring rolling the time dependent degrees of freedom for the tools movements are feedback controlled based on the developing ring geometry and the machines power limits. To achieve this  virtual sensors as well as adequate feedback control algorithms are included in the ring rolling simulation.

Process Modifications & Process Modelling for Rolling of Tailored Products

The majority of all metals will undergo a rolling process during the production chain from metal generation to the final product. These rolling processes define the product geometry, the material properties or functional surface properties. The lecture reviews selected processes for tailor rolled products as well as modeling techniques helping to design or optimize these processes. Their common goal is to improve material efficiency in flat rolling and in application of rolled products.

Tailoring the Product Properties of High Manganese Steels

Twin roll strip casting can be an effective alternative to produce high manganese TWIP steel, which provides extraordinary mechanical properties. In the work presented, 1.5-3 mm thin hot strips with up to 30 wt% manganese were produced directly from the melt and further processed to cold strip. An adapted thermo-mechanical treatment, consisting of cold rolling with or without subsequent annealing, enables to adjust different material states, such as recrystallised or strengthened state, and thus to tailor the mechanical properties. As an example for the superior crash behaviour of high manganese TWIP steels, dynamic crash tests were carried out using cold rolled Fe-29Mn-0.3C steel in different material states.

 

文档附件

相关信息
联系我们 | 所长信箱 | 网站地图 | 友情链接
地址: 沈阳市沈河区文化路72号 邮编: 110016
管理员邮箱: office@imr.ac.cn
中国科学院金属研究所 版权所有 辽ICP备05005387号

官方微博

官方微信